Skip to main content

Intro to Arduino




INTRO: to the Arduino!!!

Aright guys so this is the arduino board, it kinda looks like touching it will break some sort of electronic component in it, but it wont.


so these are like 30 dollars for just the board, but if you are a beginner you should really get it with a kit for 40-50 dollars.
also, the arduino is open-source so it can be used for any commercial project without getting sued by the makers.
 To use it you need to learn the programming for it which is a script based off of c++, and is fairly easy to learn.

Look for further posts on the uses of the arduino!

Comments

Post a Comment

Popular posts from this blog

Arduino Lesson : Using a DC motor

Hey guys, today we will be using the arduino to control a motor! to wire this just use this drawing I made in fritzing:   Unfortunately, these kinds of motors do not have an adapter that will allow you to connect it to the arduino, so I had to solder two jumper cables on each of those little metal things that come out of the motor and connect one to ground and the other to pin 6. This code will make that motor start spinning: void setup() { pinMode (6, OUTPUT); } void loop() { digitalWrite (6, HIGH); } Now upload this sketch to your arduino and the motor should start spinning. Which direction does it spin? now try swapping the cables, which way does it spin now? With most motors, it should be spinning in the opposite direction! If you have any problems do not forget to comment them! please follow me on this blog, and on twitter @axtyab, and hopefully refer this blog to others that you know!
Post a Comment
Read more

C++ Lesson : Variables

Just like in algebra, one of the first thing you must know in programming is how variables work. I am sure you understand, but if you don't, a variable is a letter or symbol that can represent any number. In C++, they can also represent things such as words or characters, but we will get into those later. Lets run through the most basic types of variables: int x; X is now an integer so it can be negative or positive, but NOT a decimal. double x; X can now be negative, positive, AND a decimal. char x; X can now be any one character like Y or H. char's are NOT values, so you CANNOT do any sort of mathematical operation with them, like this: char x = 10; char y = 5; x + y = z; z = 15; WRONG!!! but you CAN do this: char y; char x = 'h'; y = x; Now y = "h" because x = "h" and we said y = x; But now we need to understand how to assign values or characters to these variable types! For int: int x; x = 5; OR in...
Post a Comment
Read more

The IDE

Now that you have bought the arduino board (make sure you bought the arduino UNO) , let's get the IDE! This is a link to download the IDE: http://arduino.cc/en/main/software IDE stands for Integrated Development Enviorment, which is basically a programming suite for you to perform certain tasks easier. So in this case we will be trying to program our arduino! Go look at this tutorial for your first project with the Arduino: http://arduino.cc/en/tutorial/blink Make sure you hit build and run when you have it all set up!
Post a Comment
Read more